13
NOTE:
You may need to adjust the brake pedal (up or down) to gain access to
the drain bolt.
4. After it has drained, reinstall the drain screw with gasket.
5. Refill oil from oil fill plug 250 ml (8.5oz)
Cobra Venom 3 Shoe Clutch Milk
(Part # MCMUGF01) thru the fill plug.
NOTE:
Leaning the bike over onto it’s left hand side will facilitate the oil filling
procedure.
6. Reapply the oil fill screw, securely, being sure the gasket is in place.
CAUTION:
Cobra has spent considerable time and money developing the proper lubrication
to handle the harsh environment of the automatic clutch and transmission of this
motorcycle. Cobra was forced to put forth this effort because the other available
options and not adequate. Cobra’s specially developed
Cobra Venom 3 Shoe
Clutch Milk
(Part # MCMUGF01) is the recommended lubricant for your P3
motorcycle.
Chain adjustment
Tools required for chain adjustment
•
19 mm wrench or socket
•
13 mm wrench or socket
1. Make sure that the rear
wheel is aligned
properly.
2.
For proper adjustment,
the chain should have 35
mm (1 3/8”) free
movement just behind
the chain block with no
load on the bike (figure
2)
Figure 2
CAUTION:
Sit on the bike and verify that the chain has a minimum of 12mm (1/2”) free
movement when the chain is at it’s tightest point.