14
3.
If the chain requires adjusting, loosen the axle
with a 19 mm wrench and tighten the chain by
rotating the adjustor bolts clockwise (CW) or
loosen the chain by rotating the adjustor bolts
(CCW).
4. Retighten the axel bolt to 25 ft-lb (34 Nm).
5. Retighten the adjustor bolt
Figure 3
CAUTION:
Always check rear brake adjustment and free-play after adjusting the chain.
NOTE:
Lubricate the chain with a light weight oil like Liquid Performance Chain Lube, or
WD40 to reduce frictional drag.
Front brake adjustment
Tools recommended for front brake maintenance:
•
10mm open end wrench
From the brake lever:
1. Slide the cover out of the way
2. Loosen the locking nut on the brake lever.
3. Adjust the bolt to desirable position.
4. Tighten the locking nut.
5. Slide the protective cover back over the lever pivot and adjustor
From the brake hub:
1. Loosen the 10mm nut on the hub.
2. Adjust the brake cable to desirable position
3. Tighten the 10mm nut.
Figure 4,
from the brake lever
Figure 5,
from the brake hub