COBHAM Sea Tel 09 Series, Процедура обновления

Страница: 9 / 64

Upgrade Procedure, xx09 MK2
Page 9 of 64
Document No
132622 Rev B
Form # 117140-B
7. Install the power cable into the
power receptacle and install a 7”
cable tie through the P-clamp and
around the cable to prevent it from
loosening during vibration.
8. Install the Motor Drive to the MDE
harness to the “Motor Control” port
on the PCU.
9. Coil the excess GPS cable lenth and
use a cable tie to bind the coil.
10. Plug the GPS cable into the “GPS”
port on the MK2 PCU.