COBHAM SAILOR 6018, Руководство по установке

Страница: 16 / 52

Chapter 2: Installation
8 Installing the Message Terminal
6. Adjust the angle of the Message Terminal to the wanted position. The
bracket can be adjusted ± 20°.
7. Tighten the two knobs on the sides of the bracket when the Message
Terminal is in the desired position.
2.2.2 Flush mount
The Message Terminal can be mounted in a flat surface, e.g. in a console.
To mount the Message Terminal in a console, do as follows:
1. Find a suitable location in the console. Check that there is enough space
for the Message Terminal and an additional 80 mm space for cable
entry.
Make sure that there is room for service access to the unit if it is fitted in
a custom designed console.
2. Cut a hole for the Message Terminal, see the dimensions shown below.
Remove material from shaded area only
251.2mm
205mm
260mm
4.4mm
5.7mm
216.3mm
4.4mm
5.7mm
ø4.4mm
ø4.4mm
ø4.4mm
ø4.4mm