COBHAM S-TEC Thirty, Руководство по эксплуатации для пилотов

Страница: 43 / 88

2-26 3rd Ed. Feb 15, 07
S–TEC
ACTION RESPONSE
8. Set Heading Bug under Lubber
Line. ------
9. Engage heading mode. HD lamp alone is illuminated on AP
display, as shown in Fig. 2-22.
10. Turn Heading Bug to the left side
of Lubber Line. A/C Control Wheel turns to the left.
11. Turn Heading Bug to the right
side of Lubber Line. A/C Control Wheel turns to the right.
12. Set Heading Bug under Lubber
Line. A/C Control Wheel stops.
Note: If it is not possible to select a local VOR frequency on Navigation
Receiver, then proceed to step 26. Otherwise, proceed to step 13.
13. Select local VOR frequency on
Navigation Receiver. ------
Note: Proceed to either step 14 (HSI) or step 20 (DG).
14. Turn Course Pointer until CDI
needle is centered. ------
15. Engage low track mode. LO TRK lamp alone is illuminated on
AP display, as shown in Fig. 2-23.
16. Engage high track mode. HI TRK lamp alone is illuminated on
AP display, as shown in Fig. 2-24.
17. Turn Course Pointer left until CDI
needle deflection is 2 dots right of
center. A/C Control Wheel turns to the right.
Table 2-5. Pre-Flight Test, System Thirty (continued from page 2-25)