COBHAM S-TEC Thirty, Руководство по эксплуатации для пилотов

Страница: 42 / 88

3rd Ed. Feb 15, 07 2-25
S–TEC
ACTION RESPONSE
1. Move A/C Control Wheel left and
right, to sense its freedom of
movement about roll axis. ------
2. Set L/R Turn Knob located on
bezel under its index. ------
3. Engage stabilizer mode. ST lamp alone is illuminated on AP
display, as shown in Fig. 2-21.
4. Attempt movement of A/C Control
Wheel left and right. A/C Control Wheel’s reduced
freedom of movement indicates that
Roll Servo is engaged.
Roll Servo can be overridden. If not,
disconnect autopilot and do not use.
5. Turn L/R Turn Knob to the left
side of its index. A/C Control Wheel turns to the left.
6. Turn L/R Turn Knob to the right
side of its index. A/C Control Wheel turns to the right.
7. Set L/R Turn Knob under its
index. A/C Control Wheel stops.
Note:
If A/C is equipped with a heading system (HSI or DG), then proceed to step 8.
If A/C is not equipped with a heading system, then proceed to step 13 only if a
VOR frequency can be selected. Otherwise, proceed to step 26.
2.2.2 System Thirty
Prior to takeoff and with engine running, perform the actions shown in Table 2-5.
For each action, verify the corresponding response where applicable.
Table 2-5. Pre-Flight Test, System Thirty (continued on page 2-26)