COBHAM explorer 727 Скачать руководство пользователя страница 134 | Manualshive

Страница: 134 / 179

COBHAM explorer 727 Скачать руководство пользователя страница 134

Chapter 4: To use the web interface

98-126882-F

Administration

127

Remote activation

If you want to remotely control the terminal, it must have activated a connection. You can do
this by sending an SMS to the terminal. The terminal must be powered up and logged on to the
satellite services to receive the SMS and then start the connection. The SMS activation is
always protected by a password. You can set up the terminal to send an SMS confirmation on
the status of the connection, whether it is activated successfully or the activation failed.

To set up the terminal for remote activation with SMS, do as follows:

1. From the left navigation pane, select

ADMINISTRATION > Remote activation

.

2. Select whether remote activation should be

Enabled

or

Disabled

.

3. Select whether confirmation by SMS should be

Enabled

or

Disabled

.

4. Enter the password. It can be up to 32 characters long. The characters 0-9, a-z and A-Z are

allowed. The password is mandatory and must match the password in the activation SMS.

5. Enter at least one trusted mobile number from which the terminal accepts an activation

SMS. If no numbers are entered the feature is disabled automatically. Use the wild card *
to accept a range of trusted numbers.

Note

The terminal must be logged on to the satellite services
to receive and accept an activation SMS. If the SMS is
considered too old or sent before the terminal has been
switched on and has logged on, the SMS will be ignored.

Important

This service is available if the service provider has
an interoperability agreement with Inmarsat that
allows for roaming. If in doubt, contact your service
provider.

Mobile number with

wild card

Mobile numbers accepted

00453955880*

004539558800 to 004539558809

0045395588*

004539558800 to 004539558899

«
...
132
133
134
135
136
...
»

Содержание explorer 727




















































































































































































Отзывы:

Нет отзывов