COBHAM explorer 727, Руководство пользователя

Страница: 105 / 179

Chapter 4: To use the web interface
98-126882-F To manage LAN network users 98
11. At Automatic activation select whether the profile selected in the next step should be
activated automatically or manually.
•
Disabled
means you can activate/deactivate the profile from the Dashboard.
•
Enabled
means the profile is activated automatically as soon as the system is ready.
12. Select the
Primary profile
.
Select a profile from the
Primary
scroll list. This profile is used by this network user group
as a first choice, when possible.
There are several predefined profiles. The list depends on the selected usage mode.
In Standard (on-the-move) mode: Standard, Streaming 32 kbps, Streaming 64 kbps,
Streaming 128 kbps and Streaming 256 kbps.
In X-Stream (on-the-pause) mode: Standard, Streaming 32 kbps, Streaming 64 kbps,
Streaming 128 kbps, Streaming 176 kbps, Streaming 256 kbps and BGAN X-Stream (from a
minimum of 384 kbps up to approximately 450 kbps). Additionally, you can define your
own custom profiles.
For further information on profiles and traffic flow filters, see To use profiles on page 116
and To use traffic flow filters on page 119.
13. Select the
Secondary profile
.
To select more than one secondary profile, press and hold
Ctrl
or
Shift
while you select
additional profiles.
The Context Identifiers (CIDs) for the selected primary and secondary profiles are listed
under
Profile CIDs
.
14. Click Apply .
Note
If the selected primary profile is a Streaming profile, this setting has no effect.
Streaming profiles must always be activated manually from the Dashboard.
Important
If you have selected a Streaming connection as your primary profile, the LAN
interface will run a Streaming connection until you stop it or disconnect the
interface. However, if you select one or more secondary profiles, you can set
up your traffic flow filter so that it will only use the Streaming profile for
certain types of traffic.
Note
The profiles selected here only apply while you are in the same usage mode they
were selected in.
Example: In Standard (on-the-move) usage mode you have selected 128 kbps
Streaming as your primary profile. When you change the usage mode
to X-Stream (on-the-pause), the primary profile may be e.g. BGAN X-
Stream, if that was selected while the terminal was in X-Stream (on-
the-pause) mode.
Note
If you have selected both a primary and one or more secondary profiles you must
define a traffic flow filter before you can establish a valid connection.