COBHAM Explorer 710, Руководство пользователя

Страница: 83 / 181

Chapter 4: To use the web interface
98-140012-H Terminal settings 74
Power-up mode with external power
You can set the terminal to automatically power up when external power is applied.
1. In the Terminal settings page, locate Power up .
2. Under
Power-up mode when using external power
, select
Automatic
or
Manual
.
• Automatic means the terminal powers up automatically when external power is applied.
• Manual means you must use the power switch to power the terminal.
3. Click Save .
Pointing at start-up
You can set up the EXPLORER 710 to automatically register on the BGAN network at start-up.
This is useful e.g. for semi-fixed or fixed installation, where the EXPLORER 710 is not moved
around between start-ups. See
Fixed antenna installation on page 29 .
1. In the
Terminal settings
page, locate
Power up
.
2. Under Pointing mode at start-up , select Automatic or Manual.
• If the EXPLORER 710 is moved around between each power up, select Manual from the
drop-down list. With this setting, the terminal will go through the pointing procedure
every time the terminal is powered.
• If the EXPLORER 710 antenna is placed in a fixed position and the signal strength is
sufficient, select
Automatic
to make the EXPLORER 710 automatically register on the
satellite network when the terminal is powered.
3. Click
Save
.
To set up the connection mode
Mode (select network)
The EXPLORER 710 can use a cellular network as an alternative to the BGAN network. For
details, see
Optional: To set up cellular network for data on page 110
.
To set up which network you want to use when starting up the EXPLORER 710, do as follows:
1. In the
Terminal settings
page, locate
Connection
.
2. At
Mode
, select from the drop-down list which mode you want the EXPLORER 710 to start
up in. You have the following options:
•
BGAN only
(default): The EXPLORER 710 uses BGAN only. You cannot use a cellular
connection.
• Cellular modem if available at power-up : The EXPLORER 710 uses cellular network
if it is available at startup (that is if the EXPLORER Cellular Modem is inserted and the
cellular network is found)
• Cellular modem only : The EXPLORER 710 only uses the cellular network, not BGAN. If
an EXPLORER Cellular Modem is not connected, or if the cellular network does not work
for some reason, you cannot access any network.