COBHAM Explorer 710, Руководство пользователя

Страница: 107 / 181

Chapter 4: To use the web interface
98-140012-H Advanced settings 98
2. Select
Enable watchdog
.
3. Select the
Watchdog interval
.
The interval can be from one hour up to 21 days.
4. Type in the
Primary
and optionally the
Secondary
and
Tertiary IP address
.
This is the IP address(es) of the server(s) to which the terminal will send ping commands.
The terminal will start sending ping commands to the Primary IP address. If there is no
response after 10 attempts, the terminal will send up to 10 ping commands to the
Secondary and then the Tertiary IP address, if available. If no response is received from
any of the IP addresses, the terminal will eventually restart.
5. Enter the
APN
(and user name and password if required) to use for the data connection.
6. Select Enable position SMS and enter the phone number, if you want the terminal to
send SMSes with the position of the terminal to a phone number. The SMSes will be sent
with the Watchdog interval from step 3.
7. Select
Enable loopback SMS
and enter the phone number of the terminal, if you want
the terminal to send SMSes to itself in order to check the SMS function. The SMSes will be
sent with the Watchdog interval from step 3.
8. Click Save .
Next run time : This field at the bottom of the page shows what time the Terminal watchdog
will run next (UTC time).
Note
If no IP addresses are entered, pinging is skipped but the other actions still apply.
Note
When the Terminal watchdog is enabled, you must reboot the terminal before
the Watchdog settings are activated.