COBHAM Explorer 710, Руководство пользователя

Страница: 100 / 181

Chapter 4: To use the web interface
98-140012-H Advanced LAN 91
Static routing
When you have an external gateway connected to your terminal, the terminal is not
automatically able to “see” the network on the other side of the gateway. However, you can set
up your terminal to communicate with a device on the other side of a gateway, by using Static
routing. To set up a new device for static routing, do as follows:
1. From the
Control panel
gears
, select
Advanced LAN > Static routing.
2. Click Add route .
3. Enter the values for your device.
• Destination: The IP address you want to route to.
• Subnet mask: The subnet mask you want to route to.
• Gateway: The gateway, e.g. the address of a wireless access point or router to which the
destination device is connected.
4. Click
Save
.
The values for the new entry are now in the list. This means that the terminal can
communicate with the destination IP address on the other side of the gateway.
To change the APN for PPPoE
What is PPPoE
By using PPPoE, users can virtually “dial” from one machine to another over an Ethernet
network, establish a point to point connection between them and then securely transport data
packets over the connection.
On the equipment connected to the EXPLORER 710 you must enter a few settings for your
PPPoE connection. For example you need to set up which service to use (e.g. 64 kbps
Streaming) and possibly a user name and password. For details, refer to the documentation for
your connected equipment.
On the EXPLORER 710 you must set up the APN to use before you can establish a PPPoE
connection.
1. From the Control panel
gears
, select Advanced LAN > PPPoE APN.
2. Select the
APN
to use for PPPoE. You have the following options:
•
SIM default
. The APN is taken from the SIM card. This is the recommended option,
unless you have special requirements.
• Network assigned . The APN is assigned from the network.
•
User defined
. Type in the APN at
User defined name
. APNs are provided from the
Airtime Provider.
3. Click Save .