COBHAM Explorer 510, Начало работы

Страница: 5 / 16

1111
3
Connect to WLAN
WLAN is the primary interface to the EXPLORER 510. To connect your user equipment, do as
follows:
1. Check that the WLAN LED is on (green or
yellow), meaning that WLAN is ready in
your EXPLORER 510.
2. Place your WLAN-enabled device
(computer, tablet or smartphone) close
to the EXPLORER 510, but
not in front of
the BGAN antenna.
3. On your device, search for available
WLAN networks.
4. Select the EXPLORER 510 WLAN access
point when it appears in your list of
available wireless networks.
The default name is
EXPLORER510 .
NOTE:
You may have to enter a password. By default the password is the
serial number
of
your EXPLORER 510 and the encoding type is WPA2-AES . The serial number is found on the
label at the back of the EXPLORER 510.
Your device is now connected to the EXPLORER 510. When the EXPLORER 510 is registered
on the BGAN or cellular network, the connection to the Internet is established automatically.
Calls: If you want to use WLAN to make calls over the BGAN network, you must have the
EXPLORER Connect app or another SIP client installed on your smartphone. See Connect a
phone to WLAN for making calls on page 8.