COBHAM Explorer 510, Начало работы

Страница: 4 / 16

2
Insert the SIM card for BGAN
The location of the SIM slot is indicated in
the picture.
1. Loosen the two screws holding the SIM
cover.
2. Lift the cover.
3. Insert the SIM card in the SIM slot with
the chip side facing down as shown.
4. Press gently until it clicks.
5. Close the cover and tighten the two
screws carefully.
This is important in order to maintain the
IP grade of the EXPLORER 510.
Switch on the EXPLORER 510
The EXPLORER 510 has an internal battery, which is recharged when external DC power is
connected to the DC input.
To switch on the EXPLORER 510:
1. Push and hold the power button for 2
seconds until the
Status
LED flashes
rapidly green.
2. When the
Status
LED flashes slowly
(power on) or is constant green (power
on with DC input), the EXPLORER 510 is
ready for use.
NOTE:
If you hear a sound from the
EXPLORER 510 at this point, it is in pointing
mode. See
Point the antenna (BGAN) on
page 5.
To switch off, hold the power button for 2
seconds until the
Status
LED flashes rapidly
yellow (closing down).
1
2