Keypad and display menus
98-165591-B
Chapter 4: Setup and operation
4-21
4444
• <Modem TX> = [m,M],
M
(valid TX signal on modem) or
m
(no valid TX signal on
modem)
• <ODU TX> = [a,A]
A
(valid TX signal on antenna) or
a
(no valid TX signal on antenna)
• <TX pol> = [-, X, C] (TX polarization of currently active satellite profile: X (X-pol),
C (Co-pol) or - (unknown)).
After 1 hour the display is dimmed to lowest intensity. Press any key to light up the display.
4.9.2
Brightness of the display
To adjust the brightness do the following:
1. Press and hold
OK
for a short moment until
BRIGHTNESS XXX%
is displayed (XXX is
the current brightness value).
2. Hold
OK
+ press
to brighten or
to darken display.
3. Release
OK
to leave the brightness menu.
4.9.3
Navigating the menus
Use the keypad to navigate the menus.
• Press
OK
or
to select a menu item.
• Use the arrow keys
and
to go through the menu items or enter a
number, digit by digit.
• Use the arrow keys
and
to go through the settings and move
from one digit to the next.
• Press
OK
to select a setting.
• Press
to move one level up. If applicable, confirm to store the new setting by pressing
OK
.
Menu shortcuts
•
Deploy:
Press and hold
to deploy the antenna after it has been stowed.
•
Stow:
Press and hold
to Stow the antenna
•
Administrator access:
Press and hold
for 5 seconds to get temporary administrator
access
for 1 hour or until next restart
. For details, see
