Power on and auto-pointing
98-165591-B
Chapter 3: Assembly & start up
3-12
3333
To re-engage the azimuth gear, do as follows:
1. Turn off the EXPLORER 6075LX.
2. Manually turn the azimuth gear, while gently pushing the positioner head towards the
center position.
3. Having re-engaged the azimuth gear, power on the EXPLORER 6075LX.
If the disengagement was caused by an error condition in the auto-pointing procedure and
the error comes again, contact your local dealer.
3.3.2
To stow the antenna
To stow the antenna using the keypad and display
To learn how to use the keypad see
Shortcut
to stow the antenna: Press and hold
for 5 seconds. Otherwise:
1. Press
OK
and scroll to the
OPERATION
menu.
2. Press
OK
again to access the menu.
3. Press
until
STOW
is selected, and press
OK
.
4. Wait until the status shows
STOWED
.
To stow the antenna using the web interface
1. Connect a PC to the connector marked
Port 1, Service
(or Port 4, Management).
2. Open your Internet browser and enter the IP address of the EXPLORER 6075LX. The
default IP address is http://192.168.0.1
.
3. Type in the user name
admin
and the admin password or press
on the keypad for 5
seconds and enter the user name admin to access the Dashboard as an administrator.
4. Click the button
Stow
.
5. Wait until the status shows
Stowed
.
WARNING!
Stay clear of the antenna! Be aware of movements and pinch
points, especially while the antenna is being positioned, deployed or stowed.
Figure 3-16: To stow the antenna using the web interface
