Navigation
98-165591-B
Chapter 4: Setup and operation
4-15
4444
4.7
Navigation
In this section you can set Heading and Position.
•
Heading:
You can enter a fixed base heading if magnetic disturbances in the area cause
a misreading of the internal compass.
•
Position
: You can enter a fixed position if the position provided by the internal GNSS
module is not sufficiently good or you do not want to wait for a GPS fix. If you select
GNSS mode you can select between a number of different positioning systems.
Do as follows:
1. Select
SETTINGS > Navigation
from the left navigation pane.
2. Set the
Heading
(Compass direction)
mode:
Figure 4-6: Web interface: SERVICE > Navigation
Heading
(Compass direction)
mode
Description
Automatic
Magnetic heading (internal compass) is used (default). If this
value cannot be used after two readings, due to a misreading of
the internal compass because of magnetic interference, a full
azimuth scan is made.
Manual
Enter a value for the direction of the EXPLORER 6075LX as an
alternative to the magnetic heading (0 to 360 degrees, precision
±20°). 0 degrees points North, 180 degrees points South.
