6.14 Monitor
6.14.1 The command to switch between Tracker mode and Monitor mode are “tracker” and
“monitor”.The default mode is “tracker” (Tracker mode).
6.14.2 Send SMS “password” to the unit, and it will reply “monitor ok!” and
switch to “monitor” mode.
6.14.3 Send SMS “password” to the unit, and it will reply “tracker ok!” and switch
to “tracker” mode.
6.15 Data logging
6.15.1 Auto logging
：
When the tracker device lost GSM signals or fall offline from GPRS,
tracker will log the tracking position and alerts automatically on the basis of the pre-set
condition, when GSM signals get back, all the data will be auto-sent to the authorized
numbers or web platform (server).
6.15.2 Logging upon times: Send SMS: “save0password” to the tracker unit, it
will reply “save ok”, and will log the Latitude and longitude locations every 30 seconds
for 5 times. (S: second, m: minute; h: hour).
6.15.3 Multi-logging
：
Send SMS:”save030s***n+password” to tracker device, it will reply
“save ok”.
6.15.4 Cancel logging: Send SMS “password”, e.g. nosave123456
6.15.5 Logging Clearance: send SMS: “clear+password” to tracker device, it will reply
“clear ok”.
6.15.6 Logging Volume: It depends on the capacity of the SD card inserted in the tracker
device.
6.15.7 The logged data in SD card can be copied to computers through card reader, and then
the data route can be checked by importing data in the menu “Data Import” of web
platform www.gpstrackerxy.com
6.16 Data Load
The positions during the time of signal lost will be sent to server automatically when
signals recover.
6.17 Forward the third parties’ message
6.17.1 Send SMS "pspace+third parties phone number" from authorized
phone number, tracker will reply"forward ok", and supports 1 third parties phone
numbers at most.
WWW.SYRED.MX
