wire if it is negative.
6.1.6 Please put SOS button at the place driver can touch.
6.1.7 Insert the shock sensor plug into the sensor jack. (Shock sensor is Option)
6.1.8 Insert the external monitor Microphone into the monitor jack.
6.1.9 Connect the GPS and GSM antenna to the right connector, and find an appropriate
place to fix the antennas to make sure it receives signals well.
6.2 SIM CARD Installations
6.2.1
Use a tweezers or a sharp thing to touch the SIM CARD popup
switch,
the SIM CARD slot will pop up, take out the SIM card slot and put SIM card in it. And
then put the SIM card slot back to its original position after confirm the SIM card in the
right place.
6.2.2
Please make sure the SIM card is for GSM network and able to execute the function
of incoming calls display, no calls can be diverted and the PIN code is locked. The SMS
format must be TXT format, and can’t recognize the PDU format.
6.3 Turn on the Tracker Device
Connect the positive and negative wire, red and black ones, with 12V or 24V car power
system, wait for 1 minute after connecting power to wait tracker works normal, and
then turn on the backup battery switch.
6.4 GSM/GPS LED Indicator
LED Indicator Type
Behavior
Meaning
Red LED
ON
No GSM signal
Flash quickly, 1 time
per second
GSM mode with good reception
Flash slowly, 1 time
per 3 seconds
GPRS mode
Green LED
ON
Fix to satellites
OFF
Lost fix to satellites
6.5 Initialization
Send SMS “begin+password” to the unit, it will reply “begin ok” and initialize all the
settings to default factory settings.
（
default password: 123456
）
For example: send SMS “begin123456”, it will reply “begin ok”. (No quotation marks“”
when sending all the SMS)
WWW.SYRED.MX
