6.20 Cut off the Oil and Power System
6.20.1
Send command “stop+password” to tracker, tracker will execute it and reply
“Stop engine Succeed”. And it will remain immobile state until next command to
resume.
6.20.2
Stop mode
Execute immediately: Send command “qupassword” to tracker, it will reply
“quickstop OK”. Then tracker will stop the car immediately after “stop” command.
Execute depends on speed(Default mode): Send command “noqupassword” to
tracker, It will reply “noquickstop OK”, Then the tracker won’t stop the car
immediately after “stop” command, instead, it will reply “it will be executed after speed
less than 20KM/H”, and stop the car when the speed is less than 20KM/H.
6.20.3
Resume the Oil and Power System
Send “password" to tracker, it will reply "Resume engine succeed", it means
the oil supply is resumed .
6.21 Calibration of fuel sensor
6.21.1
Due to the different height of fuel tank and fuel level sensor specifications,
tracker need to set an appropriate zero value and full range value to detect the precise
fuel percentage.
6.21.2
Zero calibration: Send “ password “ to tracker when the fuel tank is
empty , tracker will adjust to zero and reply “ oilzero ok!” . The fuel value is 0%.
6.21.3
Full calibration: Send “password “ to tracker when the fuel tank is full ,
then tracker will adjust to full range and reply “ oilfull ok! “ . The fuel value is 100%.
6.22 Function of Remote Controller (Option, for model B ONLY)
Button
Function
Descriptions
ARM
Press for 0.5 second, the siren will beep one time.
DISARM
Press for 0.5 second, the siren will beep two times.
ARM &
Silent
mode
Press for 0.5 second when it is in disarm state, the siren will
beep one times. No voice from siren when alarm triggered and quit from
silent mode automatically when disarm.
SOS
Press for 3 seconds, Tracker will send SOS alert to authorized phone numbers
without voice.
Deterrence/ca
r search
Press for 0.5 second when it is in arm state, siren will beep 10 seconds, press
disarm button
to quit.
WWW.SYRED.MX