Cobalt Digital Inc 9903-UDX-ADDA, Руководство по эксплуатации продукта

Страница: 73 / 100

9903UDXADDA-OM (V1.5) 9903-UDX-ADDA PRODUCT MANUAL
3-41
Operating Instructions
9903-UDX-ADDA Function Menu List and Descriptions
(continued)
• Source Priority Selects the priority assigned to each of the four supported external
formats, and internal Free Run in the event the preferred source is
unavailable.
Source Priority 1 thru Source Priority 4 select the preferred format to
be used in descending order (i.e., Source Priority 2 selects the
second-most preferred format, and so on. See example below.)
Disable Output setting should be used with care. If Disable Output is selected with alternate intended format(s) set as a
lower priority, the card will indeed disable all timecode output should the ordinate preferred format(s) become unavailable.
Typically, choices other than Disable should be used if a timecode output is always desired, with Disable only being used
to remove all timecode data.
• Offset Controls Allows the current timecode count to be advanced or delayed on the
output video.
• Offset Advance or Delay selects offset advance or delay.
• Offset Field delays or advances or delays timecode by one field.
• Offset Frame delays or advances or delays timecode by up to 5
frames.
Note: Default settings are null, with both controls set at zero as shown.
Table 3-2 9903-UDX-ADDA Function Menu List — continued
•
•
•
HD/SD
SDI IN
SDI
OUT
In this example, Input VITC 1st priority selection selects SDI VITC (received on
SDI input) over reference VITC (received on frame reference) regardless of video
input material source to be processed by the device.
The selected timecode source is embedded on the SDI video output (in this
example, 720p) using the selected line number. In this example, if the SDI VITC
on the SDI input becomes unavailable, the device then uses the reference VITC
data received on the frame reference.
Note: Set Incoming ATC Packet Removal Control to Enabled if
Free-Run timecode is to be used. If incoming packets are not
removed, output embedded SMPTE timecode may alternate between
free-run and embedded SMPTE timecode values.
TC
FRAME REF
Reference VITC
(2nd priority)
525i
Input VITC
(1st priority)
720p
(w/ ATC_VITC)
In this example, even though
and ATC_LTC could be
available to substitute for
ATC_VITC not being present,
the card will revert to no
timecode output since the
choice of Disable Output
“out-prioritizes” ATC_LTC
with these settings.
The choices shown here
will allow ATC_LTC to
“out-prioritize” Disable
Output if ATC_VITC is
not available.