Cobalt Digital Inc 9902-UDX-FS страница 87 Скачать руководство пользователя | Manualshive

Страница: 87 / 124

background image

9902-UDX-FS-OM (V1.1)

9902-UDX-FS PRODUCT MANUAL

3-49

Operating Instructions

9902-UDX-FS Function Menu List and Descriptions

AFD/WSS/VI sub-tab provides prioritized and gated input monitoring
for AFD.

• Input Format Status Displays

Displays the current status and contents of AFD formatting.

• If a format is received, the current formatting code and description is

displayed (as shown in the example).

• If a format is not receiving data, Not Present is displayed.

• Scaler AFD Enable

Enables scaler to apply ARC settings provided by ARC controls in this
function.

• Enabled sets the output aspect ratio to track with AFD settings

performed in this tab, overriding any other scaler manual ARC control
settings.

• Disabled allows ARC coding processing performed in this tab, but does

not apply ARC settings in scaler.

Note: • This control also appears on the Scaler tab and is mutually

ganged with the selection performed on either tab.

• Scaler follows AFD functions only when a valid AFD output

format is being generated and enabled. The scaler only observes
AFD code commands, with the controls on this tab set to
generate an AFD-coded output.

• Input Mapping

When received ARC code is received, applies H/V coding as follows:

• Follow Trigger – Uses the ARC coding inherent in the received

triggering ARC.

• 4x3 ARC Codes – For received triggering formats coded as 4x3,

applies the H/V coding selected in this drop-down.

• 16x9 ARC Codes – For received triggering formats coded as 16x9,

applies the H/V coding selected in this drop-down.

Note: Settings performed here can be applied directly to the output

video, or the settings applied here can be custom modified if
desired for any of the 11 4x3 codes and any of the 11 16x9 codes
available here using the AFD Map sub-tab. Refer to AFD/WSS/VI
Translation Matrix on page 3-51 for more information and coding
descriptions.

Table 3-2

9902-UDX-FS Function Menu List — continued

•

•

•

«
...
85
86
87
88
89
...
»

Содержание 9902-UDX-FS





























































































































Отзывы:

Нет отзывов

Похожие инструкции для 9902-UDX-FS

Бренд: GE Страницы: 93

Бренд: National Instruments Страницы: 9

FIELDPOINT FP-1600

Бренд: National Instruments Страницы: 8

RDX QuikStation 4

Бренд: Tandberg Data Страницы: 2

Armor 101 Series

Бренд: Lochinvar Страницы: 28

Armor 101 Series

Бренд: Lochinvar Страницы: 44

eXtremeRAID 1100

Бренд: Mylex Страницы: 74

Бренд: NA Страницы: 22

Бренд: Garland Страницы: 43

Бренд: Z3 Technology Страницы: 67

Бренд: Wyse Страницы: 8

NetVanta Serial Dial Backup Interface Module (DIM) none

Бренд: ADTRAN Страницы: 2

Бренд: Renesas Страницы: 4

Бренд: Hologic Страницы: 256

ibaBM-FOX-i-3o-D

Бренд: IBA Страницы: 13

UEZGUI-4357-70WVN

Бренд: FDI Страницы: 30

Бренд: Geekworm Страницы: 10

Бренд: HeimVision Страницы: 167

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды