Cobalt Digital Inc 9902-UDX-FS Скачать руководство пользователя страница 82

Страница: 82 / 124

9902-UDX-FS Function Menu List and Descriptions

3-44

9902-UDX-FS PRODUCT MANUAL

9902-UDX-FS-OM (V1.1)

(continued)

• Safe Title Area (STA) Controls

• STA provides enable/disable of safe title area graticule insertion.

• STA Height and STA Width control height and width of insertion (from

0% to 100% of 4:3 outputted image area).

• Overlay Color Controls

• Overlay Color selects from white, various gray fills, or black colors.

• Inverse Color selects inversion (negative) of current selection.

• Opacity sets the opacity of the overlay for both white/black and inverse

color modes.

• Thickness sets the line thickness (in pixels).

Provides insertion and sizing controls for custom
graticules and other markers. Also provides NTSC
legacy 4:3 master reticule sizing.

Note: Color attributes of markers described below are set using the master Overlay Color Controls described above.

• Graticule Controls

• Graticule provides enable/disable of user graticule insertion.

• Graticule Height and Width control height and width of insertion (from

0% to 100% of 4:3 outputted image area).

Table 3-2

9902-UDX-FS Function Menu List — continued

White overlay color

Black overlay color

Содержание 9902-UDX-FS





























































































































Результаты поиска

Содержание 9902-UDX-FS

Отзывы:

Cobalt Digital Inc 9902-UDX-FS, Руководство по эксплуатации продукта, Страница: 82 / 124

Результаты поиска

Содержание 9902-UDX-FS

Отзывы: