Cobalt Digital Inc 1999 190, Руководство пользователя

Страница: 11 / 96

III
L
EATHER
C
ARE
FOR SPOTS AND SPILLS
Wipe up excess liquid immediately with a clean absorbent cloth or sponge. If necessary,
use clean luke warm water only and let air dry naturally. If water is used, clean the
entire area where the spot occurred. An example would be the entire seat cushion or
entire arm. Do not dry wet areas with hair dryers, etc.
FOR STUBBORN SPOTS AND STAINS
Use a mild non-detergent cleaner such as a bar of Ivory soap or Amway L.O.C.. Apply
the soap to a clean wet sponge, wash, then rinse well. Let air dry naturally.
FOR BUTTER, OIL OR GREASE
Wipe excess butter, oil or grease off the leather with a clean dry cloth, then leave it
alone as the spot should dissipate into the leather in a short period of time. Do not apply
water or try to wash a butter, oil or grease spot.
DO NOT USE
Saddle Soap, cleaning solvents, furniture polish, oils, varnish, abrasive cleaners, soaps
or ammonia water.
1) These are recommended or suggested methods of cleaning, but the manufacturer is not
responsible for damage incurred while cleaning. 2) Always try the cleaning method in a hidden area first to test
the results.
V
ACUUMING
A very effective and easy way to keep your interior ship shape is giving it a good
vacuuming. The vacuum cleaner allows you to reach in tight areas such as under the
bow, and other storage areas. It’s also a great way to clean up any debris in the bilge
area.
C
ARPET
C
ARE
The carpet in your Cobalt is made of the finest materials available. Scrubbing with
soapy water will handle most tough jobs. A simple hosing for mild cleanups will bring
out that new look. Thoroughly air dry before reinstallation into your boat. Your dealer
can suggest methods of cleaning difficult stains in your carpet.
C
ANVAS
T
OP
C
ARE
Boat canvas, in most cases, is subjected to more severe punishment than any other type
of canvas or fabric item. Moisture, dirt, heat, ultraviolet rays, salt water, and chemicals
from industrial fallout are all factors anxious to destroy your boat canvas. These
elements can do serious damage if left unchecked.
Following are some ways to slow the destructive process of canvas:
MOISTURE
Moisture can cause shrinkage, mold, and mildew. The best method of prevention is to
allow all canvas items to dry thoroughly while installed on the boat. Shrinkage can
occur anytime an article is allowed to dry while loose. Most shrinkage will occur the
7
I
NTERIOR
/E
XTERIOR
C
ARE
C
OBALT
B
OATS
- O
WNER
’
S
M
ANUAL