Coastcom D/I Mux III System, Руководство пользователя

Страница: 159 / 329

Chapter 4. Configuration and Operation
139
SC - Setting Shelf Configuration
Shelf configuration consists of the following optional settings.
•
Source of shelf settings after power-up
•
Source of strobe settings after power-up
•
Mode of operation
•
Shelf timing
•
Frame mode
•
Zero suppression mode
•
Remote alarm output
•
ALPS protection option
Type SC to Set the shelf Configuration, as depicted in Figure 4-44. To use LIU A option switch settings
on a power up, type O for the first entry. In order to set up shelf configuration from the terminal, the first
entry for the LIU option switch must be N , otherwise the SC command terminates after the first two
entries.
] SC
Enter Shelf Configuration Information
Source of Shelf Configuration Settings after Power Cycle
N) NVRAM
O) LIU-A Option Switches
[N]
Source of Strobe Card Configuration Settings after Power Cycle
N) NVRAM
O) Strobe Card Option Switches
[N]
Mode of Operation
C) Channel Bank
D) Drop/Insert
S) Dual Channel Bank
A) ALPS
[ ] A
Figure 4-44. Setting Shelf Configuration
If the ALPS (A) mode of operation is selected in the Shelf Configuration menu (as appears in the
example in Figure 4-44), the following prompt appears. The ALPS protection option should remain
disabled during the configuration process. After configuring all other parameters , if a 30309-105/115
LIU is installed in the D/I Mux shelf, and the ALPS feature is desired, select “ 1) Enabled. ” Figure 4-45
depicts the ALPS option selection screen.