20
AUXILIARY PANEL(S)
SPECIFIC BUTTONS FOR SPECIFIC DEVICES
If the spa has an Auxiliary Panel(s) installed, pressing buttons on that
panel will activate the device indicated for that button. These dedicated
buttons will operate just like the Spa Screen buttons and the equipment
will behave in the same manner with each button press.
RESTRICTING OPERATION
The control can be restricted to prevent unwanted use or temperature
adjustments. Locking the Panel prevents the controller from being used,
but all automatic functions are still active. Locking the Settings allows
Jets and other features to be used, but the Set Temperature and other
programmed settings cannot be adjusted. Settings Lock allows access
to a reduced selection of menu items. These include Filter Cycles, In-
vert, Information and Fault Log. They can be seen, but not changed or
edit
UNLOCKING
To unlock either Settings or Panel first select Settings (if it says “On”) or
Panel (if it says “On”), than press in the middle of the screen for at least
5 seconds.
OWNER’S MANUAL
2017
SCENES
WHAT ARE SCENES?
Scenes are stored combinations of equipment states. For example if you
want to have Pump 1 at high speed and Pump 2 at low speed and the
Light ON, you could store that in a Scene and recall this combination at
any time.
STORING A SCENE
Press a Scene number and hold until “Scene stored“ appears at the bot-
tom of the screen to save the current
equipment combination.
RECALLING A SCENE
To recall a Scene simply press a Scene number. Pressing any Scene
line which has not yet been stored will simply turn off all spa devices.
ADDITIONAL SETTINGS
HOLD MODE - M037*
Hold Mode is used to disable the pumps during service functions like
cleaning or replacing the filter. Hold Mode will last for 1 hour unless the
mode is exited manually. If spa service will require more than an hour, it
may be best to simply shut down power to the spa.
DRAIN MODE
Some spas have a special feature that allows Pump 1 to be employed
when draining the water. When available, this feature is a component of
Hold Mode.
