DEFAULT SETTINGS:
Restore all the settings to factory settings.
17. PTZ SETUP
Move the cursor to
【
PTZ SETUP
】
(Icon highlighted when selected), press
【
Enter
】
to access the setting
interface. You can setup the parameters for each channel separately.
CHANNEL:
The channel with PTZ connected.
PROTOCOL:
Select the protocol for the PTZ, there are two protocols to select. The default is Pelco-D.
BAUD RATE:
Select the baud rate for your PTZ, the options are 1200, 2400, 4800, and 9600.
DATA BIT:
There are 5, 6, 7, 8 options to select. The default setting is 8.
STOP BIT:
Two options to choose from: 1and 2. The default setting is 1.
VERIFY:
Options: None / Odd / Even / Mark / Space to choose from. The default setting is None.
ADDRESS:
Fill in the code of respective PTZ.
21
