EVAC-500 Voice Alarm & Evacuation System Operation Manual
35
/
42
prohibition of <no operation or prohibited loop detection, default all enabled>;
(1). “ID”
Item lists the number of current host access microphones - please configure them with actual devices
；
(2). “NAME”
The virtual name that corresponds to the microphone is not practical and is automatically allocated by
the system
；
(3). “TYPE”
For the type of microphone, users can click on this to choose between "Fire paging" and "Business
paging";
(4). “ADDRESS”
For the address of the corresponding microphone, please ensure that the current system
is connected by the "Link ID" of the first 1 ~ 5 digits, otherwise the microphone may not work properly
；
Note: please double-click in the blank area after the modification is completed, and there is no list box
“
”
Click "OK" when the drop-down list box appears in the figure,
otherwise the change is invalid.
Note: After the modification is complete, double-click in the blank area, make sure that no drop-down list box in the
"
" box appears in the list box, click "OK", otherwise the change is
invalid.
①
Similarly the user can through the Paging prompt tone switch "setting for each of the microphone switch and
specify a different prompt (bell) method with the host on the panel of receiver, here is not in the description (multiple can
set by clicking on the microphone
“
”
To switch
;
②
the same user can "Paging prompt tone switch" were set each microphone switch and specify a different tone
(bell) method and the host panel above the microphone, not described here (multiple microphones can be set through
the Click "
" to switch);
③
Users can also set up different control partitions for the 12 groups of the first microphone based on actual
requirements, by clicking “
” Add and delete, pass “
” Switch different groups
，
The group list box displays the
following
：
