EZBells
J
Carillon Operating Manual
13
Please review
Care of Discs on
Page 6
prior to loading discs. Insert up to six discs into the magazine.
If any bell functions are desired, either disc 1121 or 1111
must
be installed in tray #1. Tray #1 is
the top tray.
Loading the Disc Magazines:
1.
Pull out only one disc tray at a time
. (Pulling out more than one tray at a time can damage
the magazine.)
Tabs on the side of the magazine help in selection of the trays.
2.
Install the discs with the label side faced
down
in the tray.
3.
Return the disc tray back to its original position.
4.
Insert other discs by repeating steps (1) to (3).
Caution!
•
Only pull out one disc tray at a time. (When a disc tray has been pulled out, do not
pull out other disc trays.)
•
Insert discs label side downward. If discs are inserted label side upward, it will not be
possible for them to be played.
•
Do not touch the playing surface of discs (the plain iridescent side) with hands or
fingers.
•
The label side of the disc is actually more susceptible to damage from scratches.
Handle the discs carefully.
Once the disc magazine is replaced, the system will read each disc and fill the random play lists.
The display will show the catalog number of the disc in each tray.
One of the features of the EZ Bell
J
carillon is its ability to play standard music CDs. These CD’s
can be loaded into any tray location (except #1). Due to the condition of the discs and the source
of mastering/manufacturing, we cannot guarantee the playability of all CD’s.
Setting the Time Clock
The latest temperature compensated crystal clock circuitry gives the clock accuracy greater than +/-
one minute per year. Periodic checks and settings of the clock may be necessary to insure accurate
operation of the system. The clock is factory set to your local time before shipment and should not
require setting at the time of installation
Use the
[
⊳
cursor]
and
[cursor
]
buttons to select the Set
Time set up menu.
Choosing
SET TIME
allows you to set the
current time, day of the week and the date. Use the
[
⊳
cursor]
and
[cursor
]
buttons to select the
digit(s) to change, then the
[cursor
]
and
[cursor
]
buttons to effect the change.
Note:
The
[cursor
]
button subtracts one from the selected digit and the
[cursor
]
button adds
one to selected digits.
Time Strike
Set Time
Change Disc Function
