CMP Brilliant wonders 25677 series, Руководство по установке

Страница: 9 / 10

9
3.1.7 Balancing the Flow
It is recommended to use a 3-way valve from the return line of the pool to the waterfall to allow the flow to
be regulated. The recommended location for this valve is after the filter near the equipment pad (Figure 8).
When plumbing two or more waterfalls, follow all of the previous instructions with the addition of a 2-way
ball valve for each waterfall. The valve is necessary to balance the water flow between the units. Proper
placement of the valve is shown in (Figure 10). (CMP ball valve part numbers are 25800-151-000 for 1½”
and 25800-210-000 for 2”).
Figure 10: Multi-Waterfall Valving
NOTE: USE ONLY WATER THAT HAS BEEN PROPERLY FILTERED
4. Additional Parts List
Product Number Product Name
25676-XX0-000 LED Waterfall (X = 1-4;width)
25650-000-000 LED controller with remote control
25650-000-100 LED Remote Control replacement
25677-130-094 Square Plug
25677-130-093 Round adapter
25677-10X-980 Front door covers (X=1-4; color)
25677-XXX-990 “L” Shaped Face Covers - colored
25577-950-000 Rock Trap
For two or more waterfalls, include a
ball valve for each waterfall to control
flow. Install a rock trap for each waterfall.
BALL VALVE
ROCK TRAP