AN211
Rev 0.5 | 9/24
www.cmostek.com
2.1.4 Set Hardware Options
1) ISP space setting: If the ISP code function is needed, users need to set the corresponding space size for storing ISP code.
2) IAP space setting.: Set the space size of IAP (EEPROM)
3) Watchdog settings: it is valid only of
HWENW
in the IC option is ticked on.
4) IC option settings.
ISP space setting
IAP space setting
Watchdog setting
IC option setting
Figure 10. Hardware Options Setting
Notes:
1. In general, users only need to tick on
LOCK
(encryption)
, BO1S0O
(voltage setting for low voltage detection) and
HWBS
(if
insert ISP code
operation is performed, this item should be ticked on. Otherwise, no need to tick on it).
2.1.5 Perform
Auto
Operation
Click
Auto
button, then select the desired operations, and click
Run
after then. When one IC programming is
done, clock Run again for programming another IC. In general, users can ticked on the the options as shown
in the below figure.
