AN211
Rev 0.5 | 15/24
www.cmostek.com
2.3 Offline Copying Programming Operation
The offline copying programming connection is shown in the below figure.
The offline copying programming operation is as follows.
Download the code and hardware settings to the programmer following the offline programming
operation.
Connect the programmers as shown in the below figure
Press Auto key to start programming.
The yellow light is on during programming. After programming completion, if successful, the green turns
on and the buzzer will have one long beep, otherwise the red light turns on and the buzzer will have 10
short beeps.
Figure 19. Offline Copying Programming Connection
Press
Auto
key to start programming
