AN211
Rev 0.5 | 6/24
www.cmostek.com
When selecting
IAP (Code),
users can set the storage area. An example of IAP(Code) storage area is shown in the below
figure.
Figure 6. Select IAP(Data)
Load file
After above AP/IAP Area settings, the file loading window pops up as shown in the below figure, to load the IC code files to be
programmed to the chip (file formats are
.BIN
,
.HEX
and
.MPJ
).
1)
Select the file to be programmed.
2)
Click
Open
to load the files to be programmed. If a
.MPJ
file is loaded, users can click
Auto
button to perform Auto operation.
See Section 2.1.5 for details.
Figure 7. Load File
