AN211
Rev 0.5 | 10/24
www.cmostek.com
Figure 11. Perform Auto Operation
2.1.6 Save Project File
This operation is to save the above settings into a project file as shown in the below figure to facilitate the
further programming or mass production programming.
Save Project*.MPJ
.
chip model, AP (program), IAP (data), ISP space, IAP space,
setting
into an .mpj file.
by performing Open File -> AP and the software will automatically load the
above content.
Figure 12. Save Project File
After clicking
Save
, the project file information window will pop up, where it can be printed or saved as a picture. When opening
this project file for programming later, users can checking the printed file information or the saved image to confirm whether the
project file is correct.
