3. Scope of use
36
466789
V_01/06/2010
GB 3. Scope of use
The compressor is designed for generating compressed air for tools operated by compressed air.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer will be liable for any damage or injuries of any
kind caused as a result of this.
4. Technical data
5. Points to note when setting up the compressor
• Examine the machine for signs of transit damage. Report any damage immediately to the com-
pany which delivered the compressor.
• The compressor should be set up near the working consumer.
• Avoid long air lines and long supply lines (extensions).
• Make sure the intake air is dry and dust-free.
• Do not set up the compressor in damp or wet rooms.
• The compressor may only be used in suitable rooms (with good ventilation and an ambient tem-
perature from +5 °C to +40 °C). There must be no dust, acids, vapors, explosive gases or inflam-
mable gases in the room.
• The compressor is designed to be used in dry rooms. It is prohibited to use the compressor in
areas where work is conducted with sprayed water.
Power supply:
230 V~ / 50 Hz
Motor rating in kW:
1.1
Compressor speed in rpm:
2850
Operating pressure in bar:
8
Pressure vessel volume in litre:
24
Theoretical intake rate in l/min.:
140
Sound power level L
WA
in dB:
92
Protection type:
IP 20
Machine weight in kg:
19.5
466789.book Seite 36 Mittwoch, 16. Juni 2010 11:05 11
