CMi 401140, Оригинальное руководство пользователя

Страница: 23 / 56

23
– Retighten the safety lever (25).
Coupling handle
►
P. 3, item 1
When the coupling handle is released, the
cable pull must be completely relaxed; When
the coupling handle is pulled, the cable pull
must be tensioned in such a way that the
spring on the coupling handle starts to
extend.
– Coupling handle pulled (position
[ ]
) =
Chopping tool turns;
– Coupling handle released (position
[ ]
)
= Unit is running in idle.
Chopping spur
►
P. 4, item 4
The forwards movement of the unit is braked
by the chopping spur. The required chopping
depth is achieved by digging the spur into
the ground at different depths.
(
►
Mounting the chopping spur – p. 22)
Front support wheel
►
P. 5, item 6
The front support wheel makes it easier to
push the unit. When chopping, it must be
folded upwards.
– Pull the front support wheel from the
fixed position.
– Fold the front support wheel upwards
and click into place.
Filling with fuel
►
P. 3, item 2
– Unscrew the tank lid (7) and remove.
– Carefully pour fuel into the tank (max.
1600 ml). Do not spill!
– Check the seal in the tank lid for dam-
ages, and clean if necessary. Immedi-
ately replace damaged seals!
– Tighten the tank lid (7) by hand.
Filling with motor oil
►
P. 3, item 2
– Unscrew the motor oil filling screw (12)
and remove.
– Fill with motor oil carefully. Do not spill!
– Tighten the motor oil filling screw (12) up
again by hand.
Operation
Check before starting the device!
Check to make sure the device is in safe
operating condition:
– Check that no leaks have developed.
DANGER!
Risk of injury!
Petrol is extremely flammable!
– Switch off the motor and allow to
cool down before refilling.
– Observe all of the safety notes for
handling fuels.
NOTICE!
Risk of damage to the device!
The unit is delivered without motor
oil.
Motor oil must be filled before start-
ing the machine.
STOP
Note:
Only use suitable fuels (
►
Fuel and
lubricants to be used – p. 28).
NOTICE!
Risk of damage to the device!
The unit is delivered without motor
oil.
Motor oil must be filled before start-
ing the machine.
Operating the motor with insufficient
oil will damage the motor.
Direct oil and oil designed for two-
stroke motors will shorten the lifetime
of the motor.
Use the prescribed motor oil (
►
Fuel
and lubricants to be used – p. 28).
DANGER!
Risk of injury!
The device may only be put into
operation if there are no defects. If a
part is defective, it must be replaced
before the device is used again.
GB
Motorhacke_401140.book Seite 23 Freitag, 18. Oktober 2013 8:30 08