CMi 401140, Оригинальное руководство пользователя

Страница: 22 / 56

22
Your device at a glance
Motorised hoe
►
P. 3, item 1
1. Coupling handle
2. Steering
3. Motor
4. Front support wheel
5. Chopping tool
6. Chopping spur
8. Ignition switch
Motor
►
P. 3, item 2
7. Fuel filter nozzle
9. Fuel cock
10. Air filter cover
11. Ignition cable connector
12. Motor oil filling screw
13. Pull-starter
14. Choke lever
Scope of delivery
• Motorised hoe
• Operating manual
• Steering
• Front wheel unit
• Chopping spur
• Bag with small parts
Assembly
Mounting the chopping tool
►
P. 4, item 3
– Push all parts of the hoe tool (5) as shown
in the figure on shaft and tighten with
bolts (15) and splints (16).
►
P. 4, item 4
– Screw the protective guard (17) into place
using the bracket (18) and screws (19).
Mounting the chopping spur
►
P. 4, item 4
– Fit the chopping spur (6).
– Put the bolts (22) through holder and spur
at the required height.
– Use a pin (23) to fix the bolt into place.
Mounting the steering
►
P. 4, item 4
– Mount the handle pipe (20) on the equip-
ment as shown and fix it tightly with
screw (21).
►
P. 5, item 5
– Push control lever to guide pipe and
tighten with screw (24), safety lever (25)
and sheet metal (26) as shown in the fig-
ure. Pay attention to the position of the
sheet metal (26).
Mounting the front wheel
►
P. 5, item 6
– Screw the front support wheel (4) using
the hexagonal screw and nut (27) to the
unit as shown.
– Fit the tension spring (28).
Initial start up
Unit and operating elements
Steering
►
P. 5, item 5
Set the steering height:
– Release safety lever (25).
– Set the required steering height.
Wear robust footwear when using
the device.
Wear closely fitting clothes when
using the device.
Wear eye protection when using the
device.
Wear protective gloves when using
the device.
Note:
If any one of the parts is missing or
damaged, contact the retailer.
GB
Motorhacke_401140.book Seite 22 Freitag, 18. Oktober 2013 8:30 08