CMi 380483, Оригинальное руководство пользователя

Страница: 37 / 168

GB
37
• Dust from materials such as paint that
contains lead, some wood types, min-
erals and metals may be a health risk
as cause allergic reactions, breathing
problems and/or cancer.
Materials con-
taining asbestos may only be processed
by specialists.
• Use a dust extraction system if possible.
• You should also ensure good ventilation
of the workplace.
• We also recommend wearing a protective
mask.
• Observe the regulations that are applica-
ble in your country with regard to the
materials to processed.
• Use a dust extraction system if possi-
ble. Regularly blow the ventilation
slots clean.
When processing metals,
conductive dust may become deposited
into the power tool. This may influence the
protective insulation of the power tool.
• Only perform plunge cuts in soft materials,
for example, wood or plasterboard.
Safety notes for circular saw
• Before each use, check the protective
hood to ensure that it closes properly.
Do not operate the saw if protective
hood does not move freely and
enclose the blade instantly. Never
clamp or tie the protective hood with
the blade exposed.
If saw is accidentally
dropped, the protective hood may be
bent. Check to make sure that the protec-
tive hood moves freely and does not
touch the blade or any other part, in all
angles and depths of cut.
• Check the operation and condition of
the protective hood return spring. If
the protective hood and the spring are
not operating properly, they must be
serviced before use.
The hood may
operate sluggishly due to damaged parts,
gummy deposits, or a build-up of debris.
• Open the lower the hood by hand only
for special cuts, for example, plunge
and angle cuts. Open the hood with the
pull back lever and release the lever as
soon as the blade has penetrated the
work piece.
For every other type of saw-
ing, the hood should function automati-
cally.
• Never reach into the shaving rejection
chute.
You may injure yourself on the
rotating parts.
• Never use the saw above head height.
If you do so you will not have sufficient
control over the power tool.
• Make sure that the foot plate is posi-
tioned securely when sawing. A tilted
saw blade may break or cause kickback.
• Do not operate the power tool as a sta-
tionary device. It is not designed for
operation with a saw bench.
• Do not use saw blades made from
high-speed steel. Such blades may
break easily.
• Do not saw into metals. Hot metal
shavings may ignite the dust extraction.
• When carrying out a plunge cut that is
not performed at right angles, secure
the guide plate of the saw to ensure
that it is not able to slip sideways.
A
slip to the side may result in the saw blade
becoming jammed and thus cause kick-
back.
• Always ensure that the hood covers
blade before putting the saw down. An
unprotected, switched off but still moving
blade will move the saw in the direction
opposite the cutting direction and will cut
everything in its path. Be aware of the
time it takes for the blade to stop after
switch is released.
Additional safety notes
• Hold power tool by insulated gripping
surfaces when performing an opera-
tion where the cutting tool may contact
hidden wiring or its own cord.
Contact
with a "live" wire will also make exposed
metal parts of the power tool "live" and
shock the operator.
• Prior to starting work, use appropriate
tool to determine whether there are
any hidden supply lines are located on
the area you are working in. If in doubt,
ask the relevant supply services.
Con-
tact with power lines may cause fire and
electrical shock. Damaging a gas pipe
may cause an explosion. Damaging a
water pipe leads to considerable property
damage and may cause electrical shock.
• When working, hold the power tool
firmly with both hands and ensure you
have a stable footing.
The power tool
can be guided in a safer fashion when you
use two hands.