CMi 380483, Оригинальное руководство пользователя

Страница: 38 / 168

GB
38
• Wait until the power tool has come to a
standstill before you put it down. The
inserted tool may otherwise jam and
cause a loss of control over the power
tool.
• Avoid uncontrolled restarting. Switch
the tool off when the power supply is inter-
rupted, for example, by a power failure or
pulling the plug.
• Secure the work piece. A work piece
secured using clamps or a vice is held
more safely than one held by hand.
• Keep your workplace clean. Mixed con-
tamination by various materials is particu-
larly dangerous. Light metal dust (e.g. alu-
minium) can ignite or explode easily.
• Never use the power tool with a dam-
aged cable. Do not touch a damaged
cable and pull out the power plug
immediately.
Damaged cables increase
the risk of electric shock.
• Prevent overheating of the device and
the work piece. Excess heat may dam-
age the tool and the device.
• Shortly after being used, the tool may
be very hot. Allow a hot tool to cool
down.
Touching a hot tool may cause
burns.
• Never clean a hot tool with flammable
liquids. There is a risk of fire and explo-
sion.
• Keep the handles dry and free of
grease. Slippery handles can lead to
accidents.
• Always comply with the all applicable
domestic and international safety,
health, and working regulations.
Inform yourself before you start work
about the regulations that apply at the site
of the device.
• Remember that moving parts may also be
located behind ventilation and venting
slots.
• Symbols affixed to your device may not be
removed or covered. Information on the
device that is no longer legible must be
replaced immediately.
Dust extraction
Dusts from materials such as lead-containing
paint, some types of wood, minerals and
metal may be harmful to health. Touching of
inhaling the dusts can cause allergic reac-
tions and/or ailments of the respiratory tract of
the user or persons in the vicinity. Certain
dusts such as oak or beech dust are consid-
ered carcinogenic, particularly in combination
with wood treatment additives (chromate,
wood preservatives). Materials containing
asbestos may only be processed by experts.
– Always use a dust extraction facility.
– Make sure the workplace is well venti-
lated.
– Always wear a dust protection mask.
– Observe the regulations valid in your
country for the materials to be processed.
Risks caused by vibrations
The vibration values specified in the technical
data represent the main uses of the device.
The actual existing vibrations during use may
deviate from these as a result of the following
factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by fol-
lowing the tips below:
– Maintain the device in accordance with
the instructions in the operating instruc-
tions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and
your hands, in particular, are kept warm.
– Take regular breaks and move your hands
at the same time to promote circulation.
Remaining risks
There will still be residual risks even when the
device is used according to the instructions
and under observation of all of the safety
notes in this set of operating instructions:
• Touching the tool in the uncovered sec-
tion.
• Reaching into the operating tool.
Before putting the unit into operation,
read and observe the instructions for
use.
CAUTION! Risk of injury due to
vibrations!
Vibrations may, in particu-
lar for persons with circulation prob-
lems, cause damage to blood vessels
and/or nerves.
If you notice any of the following
symptoms, stop working immediately
and consult a doctor. Numbness of
body parts, loss of sense of feeling,
itching, pins and needles, pain,
changes in skin colour.