mDT001 HazMon System Tester Technical Manual /13
CMC INDUSTRIAL ELECTRONICS LTD
Phone: (604) 421-4425 Toll Free: (888) 421-4425
Fax: (604) 421-7734
www.cmciel.com [email protected]
The Industry Leader
in HazMon Technology
3.5 Sensor Config
The tester can configure the mTS017 Infrared Temperature Sensor and the mVM001 Vibration
Sensor:
1.
Select “
Sensor Config
” from the main menu;
2.
The display will indicate:
3.
Once connected, the display will indicate;
4.
Once the serial number has been retrieved the display will momentarily indicate;
5.
After displaying the serial number the display will indicate;
6.
Once the current configuration of the sensor has been read the display will show the values
for the sensors configuration parameters. Use the “
UP
” and “
DOWN
” keys to select the
sensor parameter;
7.
To change a sensor parameter, first select the parameter using the “
UP
” and “
DOWN
” keys
and then press the “
SELECT
” key. A left and right arrow will appear on the display
indicating it is in change mode. Use the “
UP
” and “
DOWN
” keys to set the value and then
press the “
SELECT
” key to confirm the value. The arrows will disappear when the value is
confirmed;
8.
To save the values to the sensor, use the “
DOWN
” key until the display indicates;
Connect sensor
to configure
166- 0-188- 58
230- 0- 17- 52
Wait getting
Serial number
Getting config
> > > > > > > > > > >
Save
Press Select
