mDT001 HazMon System Tester Technical Manual /12
CMC INDUSTRIAL ELECTRONICS LTD
Phone: (604) 421-4425 Toll Free: (888) 421-4425
Fax: (604) 421-7734
www.cmciel.com [email protected]
The Industry Leader
in HazMon Technology
5.
Connect the tester to the bus using the supplied cable;
6.
The display will now indicate the type of sensor being emulated and the value being sent to
the host system;
7.
The “
UP
” and “
DOWN
” keys can be used to change the value. The range of values that can
be emulated are dependent on the sensor. Negative values are permitted for some sensors.
If the sensor cannot be emulated the display will show;
8.
The “
BACK
’ key will terminate the emulation session. Disconnect the tester from the bus
before ending an emulation session.
mTS011
0.0 C 32.0 F
Sensor cannot
be emulated
