CMC Rescue Multi-Purpose Device 333010-CE, Руководство пользователя

Страница: 12 / 30

12
1. Field of Application
Personal Protective Equipment (PPE)
Pulley EN 12278:2007
Rescue Descender EN 341:2011 Type 2A
Rope Adjustment Device EN 12841:2006 Type C
Belay Device
This device must not be loaded beyond its strength
rating, nor be used for any purpose other than that for
which it is designed.
Responsibility
WARNING: Activities involving the use of this device
are potentially dangerous. You are responsible for your
own actions and decisions.
Before using this device, you must:
• Read and understand these user instructions and
warnings;
• Get specific training in its proper use;
• Familiarize yourself with its capabilities and
limitations;
• Understand and accept the risks involved;
• Have a rescue plan in place to deal with any
emergencies that could arise during use of the device.
FAILURE TO HEED ANY OF THESE WARNINGS MAY
RESULT IN SEVERE INJURY OR DEATH.
Specific training in the activities defined in the field of
application is essential before use. This device must
only be used by competent and responsible persons,
or those placed under the direct and visual control of a
competent and responsible person. Gaining an adequate
apprenticeship in appropriate techniques and methods
of protection is your own responsibility.
You personally assume all risks and responsibilities for
all damage, injury or death which may occur during or
following incorrect use of this device in any manner
whatsoever. If you are not able, or not in a position to
assume this responsibility or to take this risk, do not use
this equipment.
2. Strength
Breaking strength: 44 kN
Becket strength: 33 kN
3. Nomenclature of Parts
Principle materials: aluminum alloy, stainless steel.
4. Inspection, Points to Verify
CMC recommends a detailed inspection by a
competent person at least once every 12 months.
Record the date of the inspection and the results in
the equipment log.
Before Each Use
Verify that the device has no cracks, deformation,
marks, excessive wear, corrosion, etc. Check that the
Sheave is in good condition and working properly.
Verify the mobility of the Moving brake and the
effectiveness of the return spring. Verify that the
Release handle engages and disengages smoothly
and turns freely. Verify that the Parking brake moves
smoothly through the entire range. Verify that all
markings are legible.
During Each Use
Make sure that all pieces of equipment in the system
are correctly positioned with respect to each other.
It is important to regularly monitor the condition of
the device and its connections to other equipment
in the system. Do not allow anything to interfere
with the operation of the device or its components
(Sheave, Moving brake, etc.). Keep foreign objects
out of the device. To reduce the risk of a free fall keep
all slack out of the rope between the device and the
load. Warning: braking/locking effectiveness can
vary depending on the state of the rope (wear, mud,
moisture, ice, etc.)
5. Compatibility
Verify that this device is compatible with the other
elements of the system in your application
(compatible = good functional interaction).
Connectors used with this device shall conform
to EN 362.
(1) Moving side plate
(2) Fixed side plate
(3) Moving brake
(4) Fixed brake
with V-groove
(5) Release handle
(6) Parking brake
(7) Secondary
friction post
(8) Anchor
attachment hole
(9) Becket
(10) Sheave
EN