CM VERSA CLIMBER, Руководство по эксплуатации

Страница: 15 / 24

(OPTIONAL) ARM EXTENDERS
On the standard CM a person up to 6’ 3” tall has
a full arm extension while climbing. With opti
onal arm extenders a 6’ 9” person gets a full
stretch while climbing.
(Optional) Attach each handle spacer and handle
extender with two, 1/4” screws x 4” long.
Install quick release handgrips by depressing pin
with thumb and insert.
With the post supported or after VersaClimber is
upright, slip pump cover into place. Attach with
four Phillips pan head screws 1/4” x 3/8” long.
DO NOT OVER TIGHTEN.
Plug the transformer into the back of the post and
a 110 volt wall socket.
ASSEMBLY INSTRUCTIONS
FOR HIGH-TRI AND HIGH-FIVE
Protect the oil reservoir and the black plastic
computer housing by supporting the Versa
Climber hydraulic pump on a block of wood or
other spacer, (see page 9).
Attach the circular plate to the top of one
VersaClimber with 4 hex head bolts, 3/8” x 1
1/4
”
long and 4 3/8” lock nuts. (Do not fully tighten).
Attach second VersaClimber to the circular plate
in a similar fashion. Do not fully tighten nuts.
Lift assembly of two VersaClimbers upright.
Place third VersaClimber into position and
tighten bolts to circular plate loosely .
Connect the bases of the VersaClimbers together
with the tubular floor ties using two hex head
bolts 3/8” x 1
1/4
” long and two lock nuts per
machine.
To complete High-Tri or High-Five configuration
securely tighten all bolts at the base of the
machines and then in the circular plate at the top
of machines.
Attach foot pedals with “L” shaped
bracket
pointing up, using two 3/8” x 1
1/ ”
long
hex head bolts. FULLY TIGHTEN .
Attach handrails with three hex head bolts 3/8” x
3
1/2”
long and one 2
5/8”
long spacer.
(Optional) Attach each handle spacer and handle
extender with two 1/4” screws x 4” long.
Install handgrips by depressing pin with thumb
and insert.
Arm Extender Spacer
Arm/Handle Extender
Optional Arm Extender for
additional reach and
stretch.
Page 12