Club Car TransPorter 4, Руководство по техническому обслуживанию и ремонту

Страница: 83 / 286

BRAKE SYSTEM Emergency Brake System
6
EMERGENCY BRAKE SYSTEM
EMERGENCY BRAKE REMOVAL
1. Chock the wheels to prevent the vehicle from rolling.
2. Release the emergency brake.
3. Disconnect emergency brake cables (1) at rear wheels.
3.1. Remove locknut (2), washers (3), and shoulder bolt (4) securing each cable (1) to brake lever arm (Figure
6-24, Page 6-19) .
3.2. Using the brake cable release tool, compress the retaining clips on each end of the cable sheathing to
release cables (1) from bracket (2) on rear axle (Figure 6-25, Page 6-19) .
2
4
3
3
1
2
1
Rear axle not shown for clarity.
3211
Figure 6-24 Disconnect Emergency Brake Cables at Rear
Brake Drums
3212
Figure 6-25 Release Brake Cables from Rear Axle Bracket
4. Cut all wire ties securing cables to chassis.
5. Remove the four locknuts (6) and bolts (2 and 4) that secure the emergency brake assembly (1) to the floorboard.
Retain the washers (3) and aluminum spacers (5) for installation
(Figure 6-26, Page 6-20) .
6. Pull the emergency brake (1) and cables as an assembly from the vehicle.
2019 Transporter Maintenance and Service Manual Page 6-19