Club Car DS Villager 4, Руководство по техническому обслуживанию и ремонту

Страница: 162 / 510

9
Leaf Springs (Four-Passenger) REAR SUSPENSION
13. Remove the nut (15) and bolt (16) from the front of the leaf spring and remove the leaf spring.
14. Examine the bushings (17) and sleeves (18) in the spring eyes.
14.1. If the bushings or sleeves are worn or have damage, replace them.
LEAF SPRING INSTALLATION (FOUR-PASSENGER)
CAUTION
• When positioning the spring on the transaxle, be sure to insert the locating bolt on the spring in the
locating hole in the transaxle saddle.
1. Install the front of the leaf spring (1) onto the vehicle frame (Figure 9-11, Page 9-10) .
Figure 9-11 Leaf Spring Installation (Four-Passenger)
2. Install the bolts (2) and nut (3). Tighten the nut to 18.5 lb·ft (25 N·m).
3. Install the rear of the leaf spring onto the shackle.
4. Install the bolt (4) and nut (5). Tighten the nut to 18.5 lb·ft (25 N·m).
5. Install the shock mount bracket (6), jounce bumper (7), U-bolts (8), and nuts (9). Tighten the nuts to 45 lb·ft
(60 N·m).
6. Install the bottom stem of the shock absorber into the shock mount bracket.
7. Install the rubber bushing (10), cup washer (11), and nut (12). Tighten the nut until the rubber bushing is the
same size as the cup washer.
8. Install the brake cable onto the shock mount bracket (13) (Figure 9-12, Page 9-11) .
Page 9-10 2020 Precedent,Villager 2 and 4 Maintenance and Service Manual