Attachments and Buckets
WARNING
• Attachment interface pins must extend through the holes in attachment with lever in the locked
position. Failure to secure pins can allow attachment to come off and cause serious injury or death.
242
Figure 29
Interface Pins
243
Figure 30
Interface Lever in Unlocked Position
Removing an Attachment
1.
Tilt the attachment at least half way back and slightly off of the ground. If the attachment is hydraulically
controlled (i.e.: snow blade, etc.), stop the engine and relieve hydraulic pressure in the auxiliary circuit.
See
Relieve Hydraulic Pressure on page 25.
2.
Stop the engine, put the Forward/Reverse Handle in NEUTRAL, engage the park brake, unfasten your seat
belt, and exit the vehicle.
3.
Disconnect the hydraulic hoses, if equipped.
See Quick Couplers (If Equipped) on page 24.
4.
Pull the attachment interface lever (1) fully to the left and into the unlocked position
(Figure 30)
.
5.
Enter the vehicle and fasten your seat belt. Start the engine.
6.
Tilt the attachment interface forward.
7.
Release the park brake, then move vehicle backward, away from the bucket or attachment
(Figure 31)
.
8.
Stop the engine, put the Forward/Reverse Handle in NEUTRAL, engage the park brake, unfasten your seat
belt, and exit the vehicle.
9.
Move the attachment interface lever fully to the right. This will release the spring tension from the lever.
Page 38
IntelliTach All-Wheel Drive Diesel Vehicle Owner’s Manual
Содержание Carryall 1500 IntelliTach
Страница 2: ......
Страница 83: ......
Страница 84: ...Publication Part Number 103472517 Edition Code 0608G0613F 103472517...