Seat Latch and Adjustment
SEAT LATCH AND ADJUSTMENT
The seats are hinged to allow easy access to the engine compartment. A latch at the rear of each seat bottom keeps
the seat from moving on its hinges while the vehicle is in operation. To disengage the latch, grasp the seat back and
pull firmly in a forward/upward direction until the latch releases. To engage the seat latch, push down firmly on the seat
back until the seat locks into place.
See following WARNING.
WARNING
• Make sure seat hinges and latch are securely engaged before operating vehicle.
The driver-side bucket seat is adjustable and can be moved forward or backward to accommodate the driver. To adjust
seat, push lever located under the driver seat to the left (towards outside of the vehicle). Position seat and return
lever to its original position.
See following WARNING.
WARNING
• Do not adjust driver-side seat while vehicle is in motion.
To adjust the passenger-side seat:
1.
Remove the seat from the vehicle.
2.
Remove the four bolts and washers from the bottom of the seat mounting plate.
3.
Align the mounting plate holes with holes in the seat to achieve the desired seat position.
4.
Install washers and bolts and tighten to 96 in-lb (10.8 N·m).
5.
Install seat in the vehicle.
See preceding WARNING “Make sure seat hinges and latch...”.
IntelliTach All-Wheel Drive Diesel Vehicle Owner’s Manual
Page 29
Содержание Carryall 1500 IntelliTach
Страница 2: ......
Страница 83: ......
Страница 84: ...Publication Part Number 103472517 Edition Code 0608G0613F 103472517...