Club Car Carryall 1500 IntelliTach, Руководство пользователя

Страница: 25 / 84

Controls and Indicators
3
2
2
3
1
5
4
1
0
2
8
4
9
8
0
1
6
5
5
6
1
232
Figure 15 Lift Function
233
Figure 16 Tilt Function
Movement of the joystick (1) (Figure 15 and Figure 16) controls the hydraulic cylinders for the lift and tilt functions.
See following NOTE.
NOTE: The joystick will not activate the attachment arm unless the start key is ON and the joystick ON/OFF rocker
switch is in the ON position (Figure 13) .
The joystick is an ON/OFF control. It does not have proportional control.
Activating the joystick with the engine OFF but the key switch ON will cause battery discharge. The hydraulic
system is powered by an electric motor. Limit the time that you use the joystick in this manner to avoid
discharging the battery.
When engaged in heavy attachment use, avoid the continued use of electrically powered devices (i.e. bed
lift, work lights, lower fan speed on heater, etc.). Either drive the vehicle or allow it to idle occasionally to
let the battery recharge.
Attachment Arm Operation
Pull the joystick (1) backward (2) to raise the attachment arm (Figure 15) .
Push the joystick (1) forward (3) to lower the attachment arm.
Attachment Arm Float Position
To activate the float function, push the right-side of the rocker switch (4) and at the same time, push the joystick (1)
forward (3). The light (5) on the float switch will be illuminated when the float function is activated. Once the float
function is activated, release the switch and the joystick
(Figure 15) .
To disengage the float function, pull the joystick (1) backward. The light (5) will no longer be illuminated.
Tilt Operation
1. Move the joystick (1) to the right (5) to tilt the bucket forward (Figure 16) .
2. Move the joystick (1) to the left (6) to tilt the bucket back.
IntelliTach All-Wheel Drive Diesel Vehicle Owner’s Manual Page 23