Club Car 1995 Golf Car, Дополнение к руководству по обслуживанию

Страница: 88 / 100

CHARGER AC CORD (FIGURE 19-18)
Removal of the AC Cord:
1. Unplug the AC and DC cords.
2. Remove the charger cover.
3. Disconnect the AC cord black wire at the circuit breaker.
4. Disconnect the AC cord white wire at the primary coil.
5. Disconnect the AC cord green wire at the charger base.
6. Use a pair of pliers to grip the strain relief bushing and remove it and the AC cord from the charger.
Installation of the AC Cord:
1. Insert the black, white, and green leads of the new AC cord into the charger through the hole in the
charger face.
2. Connect the black wire to the circuit breaker, the white wire to the primary coil, and the green wire to the
charger base.
3. Position the strain relief bushing on the AC cord.
4. Using pliers, install the strain relief bushing into the mounting hole in the charger face.
5. Install the charger cover.
19-26
NOTE
• MAKE SURE THAT THE GREEN (GROUND) WIRE IS TIGHTLY SECURED TO THE CHARGER
BASE.
GREEN GROUND
WIRE
TAN WIRE TO
PRIMARY COIL
TAN WIRE TO
PRIMARY COIL
WHITE WIRE
FROM AC CORD
BLACK WIRE TO
CIRCUIT BREAKER
RED WIRE TO
HEAT SINK
BLUE WIRE TO
D.C. CORD
AC CORD
CHARGER
RELAY
AC CIRCUIT
BREAKER
BLACK WIRE TO
POWER RELAY
FIGURE 19-18