Clockaudio CCRM 4000, Инструкция по установке и эксплуатации

Страница: 16 / 32

Page 10 of 25 V2.1 2021-01
11.
Connect the microphone on to the Mini XLR
connector (push fit).
WARNING: Do not operate the CCRM 4000
without connecting the microphone.
12.
Remove any kinks or bends in the cable by
gripping the cable with your hands and pass it
through a clean dry cloth a few times. This will
straighten the cable. Connect the RJ12 plug
from the top bezel into Socket 2 (BEZEL) on the
Main unit.
13.
For safety reasons the frame to ceiling tile
fixing eye bolt (2 at each end of the bracket)
are used to secure the frame and also used to
suspend the CCRM 4000 and bracket. Unravel
the Y cable harnesses and attach the hooks to
the eye bolts at each end of the ceiling tile
bracket.
14.
Push the free end of the cable harness through
one of the holes located on the Gripper. Now
loop the free end of the cable over a secure
fixing such as a ceiling truss, eye bolt, or any
structure capable of taking 7Kgs of weight.
Now pass the cable through the remaining hole
in the Gripper and then pull on the cable to
adjust / take up the slack. Do the same with
the other Y cable at the other end of the ceiling
tile bracket.
Cable can be slackened or removed by
inserting the supplied release key into the hole
as shown.
Insert release key
into hole
Gripper