Clockaudio CCRM 4000, Инструкция по установке и эксплуатации

Страница: 24 / 32

Page 18 of 25 V2.1 2021-01
5.4 Audio Out Socket
The type of socket on the Audio out is dependent upon the type of CCRM 4000 that was purchased.
5.4.1
Single Element version
On the single element CCRM 4000 audio output is provided via a 3 pin XLR connector for connection
to a mixer of DSP. Phantom power adaptor is inbuilt but requires an external 9-48VDC phantom
power to be applied.
5.4.2
Tri Element version
On the tri element CCRM 4000, audio output is provided via a RJ45 Socket for connection to a mixer
or DSP. Phantom power adaptor is inbuilt but requires an external 9-48VDC phantom power to be
applied.
Supplied with the tri element CCRM 4000 is a link cable to enable fast connection of the audio
output to the preferred audio device (DSP / Mixer). Connect a CAT 5 cable with a RJ45 male plug at
each end (not supplied) to the RJ45 Socket on the link cable. Connect the 3 x Phoenix connectors of
the link cable to the preferred audio device (mixer / DSP).
Audio Out RJ45 Socket Audio Link Cable
RJ45 Pin
no. Cable Colour Function
1 Orange/White Mic 3 Phase +
2 Orange Mic 3 Phase -
3 Green/White Mic 2 Phase +
4 Blue Mic 1 Phase +
5 Blue/White Mic 1 Phase -
6 Green Mic 2 Phase -
7 Brown/White Not used
8 Brown Ground
Mic 1
Mic 2
Mic 3